Installation Method Of Flexible Film LED screen

Modul

Installation Method (1)

Installation Method (1) Steps:

             1. Tear off the surface film of the transparent screen so that the silicone layer is attached to the clean glass surface.

             2. Connect the wiring of the PCB to the inside of the power box, and then fix the power supply on the side frame of the glass curtain wall.

             3. Connect the signal line and power line up and down, and then cover the power supply. Such a frame is ready for the following installations and so on.

Installation Method (2)

Installation Method (2) Steps:

             1. Tear off the surface film of the transparent screen so that the silicone layer is attached to the clean glass surface.

             2. Connect the wiring of the PCB to the inside of the power box, and then fix the power supply on the front frame of the glass curtain wall.

             3. Fix the cable cover on the side of the curtain wall to block the exposed cables.

             4. Connect the signal line and power line up and down, and then cover the power supply. Such a frame is ready for the following installations and so on.

Installation Method (3)

Installation Method (4)